thg-corporation
 

  hope-direct

one-click-configurator

Take a Video Tour
    of The Hope Group

Take-A-Tour-of-THG
  View Video Archive


Our Best Advice

Customers rely on us to help select components, design complex systems, to manufacture, install, and maintain machinery and equipment. We offer our best advice through our blogs.


The Hope Group

The-Hope-Group
The Hope Group is an authorized full-line Parker distributor featuring hydraulic, pneumatic, fluid connector, and sealing products for OEM and MRO applications.

Sorensen-Systems
Sorensen Systems is a designer/builder of custom systems providing clean water, renewable energy sources, and technologically advanced process systems for industry.


Hope-Air-Systems
Hope Air Systems is an authorized distributor for Kaeser Compressor featuring energy efficient rotary screw compressors as well as a designer/builder of skid-mounted packaged compressed air systems.


Hope-Service
Hope Service can dispatch its field service fleet of vehicles and experienced, factory-trained technicians to provide emergency and routine field service to its hydraulic, electrical, and compressed air systems customers.

The-Parker-Store
The Hope Group owns and operates eight Parker Stores at its branch locations providing "while you wait" replacement of hose assemblies and immediate on-hand access to 3,000 Parker fluid connector parts.


Hope-Direct
The Hope Group provides 24 hour access to $150 million of Parker parts through its eCommerce website, HopeDirect.com, offering one or two-day shipping of all your hose & fittings, hydraulic, pneumatic, valve, and filtration needs.


iPower
iPower Distribution Group of New England provides supply chain consulting and implementation through streamlined procure-to-pay process, vendor managed inventory (VMI), Kanban, and in-plant buyer-planner services.

 

 
 
The Hope Group Home › News From The Hope Group › The Hope Group Announces Hydraulic Trainings
 
 
 
 
News-from-the-Hope-Group.png
 

The Hope Group Announces Hydraulic Training Sessions to Run on June 15

Northborough, MA (05-19-2016) - Tony Cantone, President of The Hope Group, today announced that on June 15, The Hope Group and Parker will offer its two most popular workshops, Hydraulic Fittings Thread ID and Safety Works at its Parker Store location in Fitchburg, Massachusetts. Participants may elect to attend one or both seminars, according to Tony.

Experts from Parker and The Hope Group will provide free hands-on training for original equipment manufacturers and end users of hydraulic components and systems. "It's an incredibly informative training plus we provide lunch to participants and a chance to win a DeWalt power tool in a prize drawing at the conclusion of the seminars," says Tony.

Hydraulic Fittings Thread ID Training

8:30AM - 12:30PM
Certified trainers from Parker and The Hope Group provide students with instruction and hands-on training in various sealing methods common to hydraulics and to gain a working knowledge of the four-step process necessary to identify threads. Although Metric, British, SAE, and NPT are all common thread patterns found in today's industrial workplace, they are often a mystery to many people. This interactive course combines classroom instruction with practical hands-on training. This course is for owner/operators, designers, repair technicians, engineers, and safety managers.

Safety Works Training

1:30PM - 3:30PM
The hydraulic plumbing seminar addresses the issue of hydraulic fluid escaping from pinhole leaks in hoses caused by factors such as age, incompatible fluids, hose twist, and minimum bend radius violations. Escaping pressurized fluids can travel at bullet speeds and can penetrate deep under the skin. The danger lies in the victim underestimating the need for immediate treatment. Often, the simple puncture would not appear as dangerous as it really is.

Participants will learn the five-step process for correct hose selection, the importance of proper hose assembly and routing guidelines to help prevent premature system failures. Certified trainers from Parker and The Hope Group lead students on how to avoid injection injuries and the importance of timely treatment should an injection occur. This course is for equipment operators, repair technicians, safety managers, engineers and anyone working with pressurized fluid or systems in motion.

How to Register

Anyone interested in attending either of these workshops may pre-register online.

register-now




top

 


The-Hope-Group-Logo
Our Triangle Logo Design
Represents 3 Companies

The corporate logo was developed about 33 years ago. The triangle design represents the three operating divisions, which include The Hope Group, Hope Air Systems, and Sorensen Systems.


parker-distributor-logo Our Parker Partnership
Goes Back Over 55 Years

Since 1960, The Hope Group has been associated with Parker Hannifin, the world's leading diversified manufacturer of motion and control technologies and systems. Fully 80 percent of the domestic revenue for Parker flows through its Distributor network.


hope-group-headquarters-northborough Our Main Office
is in Northborough, MA

The headquarters of The
Hope Group is located in Northborough MA, at the intersection of I-495 and I-290, only a few miles north of the Massachusetts Turnpike, exit 11. From this convenient location, built to meet its specific design requirements in 1985, the company extends its reach through its eight branch locations in Maine, New Hampshire, Massachusetts, Rhode Island and Connecticut.

 
Technical-Support
get-assistance
request-a-quote
order-hope-direct
ask-an-engineer
ask-betsey-508-393-7660
view-line-cards
request-a-catalog
view-cad-drawings
hose-finder-app

Our-Best-Advice
Ray-McCann   Monitoring Operational Conditions In The Palm Of Your Hand
Ray McCann
Fluid Power Specialist

Mike-Gardella   Sorensen Systems Designs Aerospace Fluid Control Test Stand
Mike Gardella
Dir - Engineering & Mfg

Peter-Rhoten   10 Worst Things You Can Do To Your Air Compressor
Peter Rhoten
Hope Air Systems

Donna-Tibbetts   One of Our Stores is Open 24 Hours a Day!
Donna Tibbetts
Operations & Service Mgr

doug-markham-ipower-new-england   When Should Materials be Stocked at Point of Use?
Doug Markham
President, iPower NE

 
 
  
 
 

The Hope Group, a division of KLX Inc. | 70 Bearfoot Road, Northborough, MA 01532

Phone: 508-393-7660 | Fax: 508-393-8203 | Email

Conditions of SaleLegal DisclaimerJobsOur Mission

© 2018, The Hope Group. All rights reserved