Unlike fuses, circuit breakers offer superior protection in applications such as relay circuits, motors, heaters, transformers, solenoids and semiconductors. A variety of sizes and styles are available including finger safe spring screw terminals, panel mount or socket mount, available in 1 or 2 poles.
See all Circuit Breakers
|
A DIN rail or top-hat rail is a standardized 35 mm wide metal rail with hat-shaped cross section. It is widely used for mounting circuit breakers and industrial control equipment inside equipment racks.
See all DIN Rail
|
There are many advantages to implementing a Distributed I/O system including eliminating expensive point-to-point wires by networking just a few, or many, process signals onto one digital communication link. For data acquisition, it sends signals from field-mounted sensors, transmitters, transducers and alarms.
See all Distributed I/O |
Available from Baldor is a wide range of motors designed to conserve energy over an extended period of time. These energy efficient electric and adjustable speed drives motors are available in totally enclosed fan cooled and open drip proof designs.
See all Motors |
A programmable logic controller (PLC) or programmable controller is a digital computer used for automation of electromechanical processes, such as control of machinery on factory assembly lines. Unlike general-purpose computers, the PLC is designed for multiple inputs and output arrangements, extended temperature ranges, immunity to electrical noise, and resistance to vibration and impact.
See all PLC's
|
Most OEM manufacturing facilities rely on precision sensing systems to meet critical assembly and machining requirements utilizing power sensors, conveyor sensors, limit switches, capacitive sensors, photoelectric sensors, inductive sensors and associated accessories including cables, and mounting brackets.
See all Sensors |
Any type of connector that allows more than one wire to be connected to another in the same circuit without a hard splice is commonly referred to as a terminal block. The connection can be permanent or temporary, depending on the application. Available terminal blocks include through, ground, shield, angled, horizontal high-current or multilevel.
See all Terminal Blocks |
The conversion of pressure into an electrical signal is accomplished with a transducer. As the transducer reacts to pressure on its diaphragm, there is a measurable electrical resistance change proportional to the pressure. In this manner, it's possible to utilize a gauge to determine the amounts of change.
See all Transducers |
