thg-corporation

the-hope-group-banner
 

  hope-direct

one-click-configurator

Take a Video Tour
    of THG Corp

Take-A-Tour-of-THG
  View Video Archive


Our Best Advice

Customers rely on us to help select components, design complex systems, to manufacture, install, and maintain machinery and equipment. We offer our best advice through our blogs.


THG Corporation

The-Hope-Group
The Hope Group is an authorized full-line Parker distributor featuring hydraulic, pneumatic, fluid connector, and sealing products for OEM and MRO applications.

Sorensen-Systems
Sorensen Systems is a designer/builder of custom systems providing clean water, renewable energy sources, and technologically advanced process systems for industry.


Hope-Air-Systems
Hope Air Systems is an authorized distributor for Kaeser Compressor featuring energy efficient rotary screw compressors as well as a designer/builder of skid-mounted packaged compressed air systems.


Hope-Service
Hope Service can dispatch its field service fleet of vehicles and experienced, factory-trained technicians to provide emergency and routine field service to its hydraulic, electrical, and compressed air systems customers.

The-Parker-Store
The Hope Group owns and operates seven Parker Stores at its branch locations providing "while you wait" replacement of hose assemblies and immediate on-hand access to 3,000 Parker fluid connector parts.


Hope-Direct
The Hope Group provides 24 hour access to $150 million of Parker parts through its eCommerce website, HopeDirect.com, offering one or two-day shipping of all your hose & fittings, hydraulic, pneumatic, valve, and filtration needs.


iPower
iPower Distribution Group of New England provides supply chain consulting and implementation through streamlined procure-to-pay process, vendor managed inventory (VMI), Kanban, and in-plant buyer-planner services.

 

 
 
The Hope Group Home › Engineered Systems › De-Ionized Water Compact Cooling System
 
 
 

Navigation for TheHopeGroup.com

home-icon
 
engineering-case-study-banner
 

Compact Cooling System For
Deionized Water Machine

A major New England-based ion implementation system manufacturer determined that its new machine design must meet a more compact footprint and more flexible design criteria to stay competitive. The existing design, which included a separate skid-mounted cooling system, was outdated and no longer cost efficient. Some of the new criteria included a more compact layout, improved cooling capacity, use of de-ionized water, improved portability and integration of new safety and operating controls into the overall system control.

The Hope Group engineers designed a compact cooling system, which included a reservoir, filtration and distribution system to provide cooling throughout the machine, utilizing custom tubing, valves and fittings. To accommodate the new design, a wedge-shaped cabinet was created to fit the new, smaller footprint. Additionally, it had to be portable, as the de-ionized water had to be purged periodically and the cabinet needed to roll away from the main unit while maintaining its connections. A three-stage pump was employed, suitable for use in US and international settings.

This was a de-ionized water skid to provide the required cooling water through components of the system. There was a large pressure drop created through the valves, tubing and components that required cooling during the Ion Implanting process. This required many components for pumping, distributing and controlling the flows. The existing skid did provide the required conditions but, a separate skid to be placed in close proximity to the Implantation machinery was very costly considering the space was a clean area and the real estate was at a premium in these plants.

Retrofit Solution

The Hope Group put an engineering package together which included a design, and components which would provide a very small footprint system to meet all the requirements of the company. Our customer reviewed the proposal and made some changes and recommendations to more closely meet the specifications they needed. The existing Implantation machine was being retrofitted and revised to accommodate the proposed system along with the tubing and valves required to provide the necessary cooling. The area designated for the new system was triangular shaped and was very small for the required equipment. In addition, it had to be portable for service and had to stand alone for system operation. The safety features and operating controls had to be integrated into the overall existing system control.

Sensor Monitoring

De-Ionized water requires special component materials so contamination will not affect the integrity of the water. The water had to be used until the resistivity/conductivity and temperature of the solution went out of a predetermined range. This required special sensors and controls to monitor temperature, flow, pressure and conductivity to respond to the needs of the process. The unit had to be moved out some distance for refilling of new De-Ionized water and returned for continuation of the process. This was addressed with specific tubing runs and lengths which The Hope Group also provided with the project.

DI-Water System Solution

The Hope Group provided a compact system which contained a reservoir, filtration and all distribution systems for serving many areas of the Implantation system with the water. The cabinet which housed the system was in a critical location and had to have monitors for any water which might have leaked or dripped from the system. This was all wired and condensed into a cable which was connected with the main operating control unit which the customer integrated with the main system. The custom tubing, valves and fittings were kitted and provided the water system to connect to all the components.

The pump had to be a 3 stage unit which was large and had to be engineered for the flow and pressures which varied with the many customers who bought these machines. The system specifications required that the D-I system work within a large temperature and electrical range as provided in different parts of the world.

This system as delivered, gave the same cooling water requirements that the original large skid unit provided and with a large cost reduction. The packaged system fit very compact into the Implantation main frame and the manufactured tubing sets were a cost reduction for the installation of the process runs. The power and temperature variables were provided for all customers who purchased the systems without model changes.



top

 
di-water-retrofit
Changing requirements forced a redesign of a de-ionized water skid, which was part of a major manufacturer's product line. The need to operate within a smaller footprint, the need for portability and ease of operation all contributed to the engineering challenge met by the engineers at The Hope Group.


ion-implantation-machine
The redesign included a three-stage pump sized for 50/60 Hz use with space saving and ease of service in mind.

di-water-machine
A kit was prepared for the hose assembly, which took into account critical measures for flow, pressure and material compatibility.

ion-implantation-manifold
The system featured a manifold designed to distribute de-ionized water throughout the machine plus pre and post filtration and a storage reservoir.
 
Technical-Support
get-assistance
request-a-quote
order-hope-direct
ask-an-engineer
ask-betsey-508-393-7660
ask-the-owner
view-line-cards
request-a-catalog
view-cad-drawings
hose-finder-app

Our-Best-Advice
Ray-McCann   Monitoring Operational Conditions In The Palm Of Your Hand
Ray McCann
Fluid Power Specialist

Mike-Gardella   Sorensen Systems Designs Aerospace Fluid Control Test Stand
Mike Gardella
VP Engineering & Mfg

Peter-Rhoten   10 Worst Things You Can Do To Your Air Compressor
Peter Rhoten
Hope Air Systems

Donna-Tibbetts   One of Our Stores is Open 24 Hours a Day!
Donna Tibbetts
Operations & Service Mgr

doug-markham-ipower-new-england   When Should Materials be Stocked at Point of Use?
Doug Markham
President, iPower NE

 
 
 
   
thg-logo

THG Corporation
70 Bearfoot Road
Northborough, MA 01532

Phone: 508-393-7660 | Fax: 508-393-8203 | Email

Terms & ConditionsLegal DisclaimerJobsOur Mission

© 2015, THG Corporation. All rights reserved