We design solutions that meet our Customers' every need

Preventive Maintenance

Challenge: How to properly design an air compressor system, particularly for specialized systems, complex installations or in facilities with limited space.

Myth: Knowing how much “peak psi” performance will be required is all you need to know.

Learn from us: To function properly and cost-effectively, your air compressor system must be carefully designed to fill the special needs of your unique application. There are six critical elements that must be considered in the design of any new system. These are demand, air quality, supply, storage, distribution and control. Each must be evaluated separately and more importantly, in combination to achieve optimum results.

The Hope Group responds: After you have designated someone in your plant to take full responsibility for your compressed air system and associated components; The Hope Group is ready to team up with your maintenance supervisor to make sure your air compressor system keeps running at peak efficiency. It’s a team effort and we stand ready to contribute our share to a winning maintenance strategy. The Hope Group can provide preventive maintenance programs for your compressor, compressed air dryer, blower, booster, nitrogen generator, PET packaged system, chillers, cooling systems, vacuum systems or any mechanical device in your mechanical room. Through a combination of available programs, The Hope Group can provide a Preventive Maintenance agreement to meet your needs. We can schedule Annual Maintenance where it’s appropriate. And, we are ready 24 hours a day to provide emergency repairs and rentals.

Let’s prevent trouble

Hope Air Systems believes that an air compressor system requires 1) care for the equipment, 2) monitoring of equipment performance, 3) scheduled routine and prompt emergency service. Here are some of the things that are covered in a standard Preventive Maintenance program:

Air Compressor

  • air filter replacement
  • oil filter replacement
  • replace separator element as required
  • replace panel filter as required
  • inspection of electrical components
  • oil change or top-off as required
  • cooler blowout
  • wipe down of exterior

Dryer

  • blow out condenser
  • inspection of electrical components
  • clean drain trap
  • wipe down of exterior

Filter

  • inspect
  • clean condensate drain
  • replace element as required
  • wipe down of exterior

Condensate Separation Systems

  • inspect for proper operation
  • wipe down of exterior

Receiver Tank

  • inspect
    • safety relief valve
    • pressure gauge
    • drain valve