When Hydraulic Failure is Not an Option, Fluid Analysis is the Answer

While it may be cliche to claim that “failure is not an option,” the reality is that with regard to hydraulic and oil lubrication systems, various levels of failure are more common than we like to admit. Despite our best efforts to prevent failures, according to reported industry incidents, more than 75 percent of all hydraulic system failures are attributable to fluid contamination. Those tiny bits of what-not floating around in your oil can lead to slow degradation of your system, which contribute to short-lived transient failures that can suddenly erupt into catastrophic failures. Learn how hydraulic fluid testing can detect contaminants early.

Hydraulic Fluid Monitoring Tests

Parker Fluid Condition Samples ParTestThe best chance to reduce or eliminate failures in hydraulic and oil lubrication systems is to institute a hydraulic fluid testing and monitoring system. This can range from a simple routine of scheduled sample testing hydraulic or any type of fluid all the way to installation of remote system monitoring on a continuous basis. Fluid analysis such as the Parker Par-Test™ is able to identify potential problems that cannot be detected by human senses. Each time a test sample is taken and analyzed, system operators can be assured that fluids remain within acceptable parameters. Consistent application of these tests and the correct interpretation of the findings can help prevent major hydraulic and lube oil systems failures.

Remote Hydraulic Fluid Monitoring

In many industrial applications, such as modern gas turbine power plants, there is a need for remote operation without the need for servicing between scheduled maintenance events. Such applications, which are unstaffed areas or are significantly difficult to access, the remote capability assures any fluid degradation is detected quickly. Real-time fluid condition monitoring is also important where any failure could affect the safety of operations. With the proper trend analysis, important pre-warnings can be made to ensure that predictive corrective actions can be taken.

iCount PD detects particle contaminants in hydraulic fluid 

Parker icountPD SensorRecently, we had a chance to work with a client that had a requirement for remote fluid monitoring and the Parker iCount particle detector system was exactly what they needed. The Hope Group and Parker can provide direction on how to properly install the detector for each application. Proper installation ensures that the unit will operate accurately. With proper analysis and planning the system can be a quiet, effective solution to ensuring against failure.

Request an Oil Analysis Kit

Contaminants damage components and shorten the lifespan of a fluid power system. See where your system stands by analyzing hydraulic fluids for common contaminants.